Tekniset tiedot
PROJECTION
CRT: 3 x 07MS 7 high brightness, high resolution CRTs, liquid cooled, air coupling, average life about 10.000 hrs
Lenses: 3 HD 145 high definition fully colour corrected by multilayer coating, high resolution, 135 mm focal length. F number f/1.03, focus adjustments for the centre and borders; optical resolution more than10 lp/mm at 50% MTF
Brightnesst: 950 lumens at white peak
Picture size: 60"-250 diagonal screen width; 122 cm-508 cm
Installation: rear or front projection; either floor or ceiling mounted (ceiling bracket supplied)
ELECTRONICS
Horizontal scan frequency: 15-16 KHz and 32-38 KHz autolock (VGA and S-VGA compatible)
Vertical scan frequency: 40-130 Hz autolock
Bandwidth: 20 MHz
Dynamic focus: horizontal and vertical
Resolution: more than 1000 TV lines with RGB video input; 800 x 600 pixels with S-VGA input
Convergence type: digital convergence with 17 adjustments made by remote control
Colour temperature: 3200° K, 6500° K, 9300° K, plus one user choice selectable and adjustable by remote control (6500°K factory preset)
Colour system: quad standard (PAL, SECAM, NTSC 4.43 and 3.58)
Cut-Off: automatic to improve the colour temperature stability
Keystone: adjustable trapezium correction with a maximum of 20°
Masking: horizontal and vertical masking adjustable by remote control
Test pattern: 8 internal test patterns
Memory manager: 25 user memory banks with select, copy, move and delete functions
INPUTS/OUTPUTS
RGB Input 1: via 5 x BNC (R, G, B, H/V, V)
RGB Input 2: via SCART
YCrCb input: via 3 x BNC
VGA input: via D-sub 15 pin
Video Input 1: via BNC or via SCART
Video Input 2: via BNC
S-VHS input 1: via mini DIN 4-pin
S-VHS input 2: via SCART
Video output: via BNC
RS 422 Serial interface: via DB 9 connector
Output voltage: 2 different power jacks with 12 Volt DC, 10 mA max output power supply: one is active only when the projector is ON, the other one is active only when a 16:9 or wide image format is selected
STANDARD ACCESSORIES
New up converter (built-in): for line doubling, field doubling for both progressive and interlaced signals
GENERAL
Information: On Screen Display by Remote Control
Input voltage: 90-270 Vac 48-62 Hz with Power Factor Corrector
Power consumption: 220 Watt max
Stand-by consumption: 6 Watt
Dimensions (WxHxD): 620 x 290 x 700 mm (24 x 11 x 27")
Packaging dimensions (WxHxD): 800 x 490 x 880 mm (31 x 19 x 34")
Net weight: 35 Kg (77 lbs)
Operative function conditions: temperature between 0°C and 40°C, relative humidity from 0% to 90% not condensed
CRT: 3 x 07MS 7 high brightness, high resolution CRTs, liquid cooled, air coupling, average life about 10.000 hrs
Lenses: 3 HD 145 high definition fully colour corrected by multilayer coating, high resolution, 135 mm focal length. F number f/1.03, focus adjustments for the centre and borders; optical resolution more than10 lp/mm at 50% MTF
Brightnesst: 950 lumens at white peak
Picture size: 60"-250 diagonal screen width; 122 cm-508 cm
Installation: rear or front projection; either floor or ceiling mounted (ceiling bracket supplied)
ELECTRONICS
Horizontal scan frequency: 15-16 KHz and 32-38 KHz autolock (VGA and S-VGA compatible)
Vertical scan frequency: 40-130 Hz autolock
Bandwidth: 20 MHz
Dynamic focus: horizontal and vertical
Resolution: more than 1000 TV lines with RGB video input; 800 x 600 pixels with S-VGA input
Convergence type: digital convergence with 17 adjustments made by remote control
Colour temperature: 3200° K, 6500° K, 9300° K, plus one user choice selectable and adjustable by remote control (6500°K factory preset)
Colour system: quad standard (PAL, SECAM, NTSC 4.43 and 3.58)
Cut-Off: automatic to improve the colour temperature stability
Keystone: adjustable trapezium correction with a maximum of 20°
Masking: horizontal and vertical masking adjustable by remote control
Test pattern: 8 internal test patterns
Memory manager: 25 user memory banks with select, copy, move and delete functions
INPUTS/OUTPUTS
RGB Input 1: via 5 x BNC (R, G, B, H/V, V)
RGB Input 2: via SCART
YCrCb input: via 3 x BNC
VGA input: via D-sub 15 pin
Video Input 1: via BNC or via SCART
Video Input 2: via BNC
S-VHS input 1: via mini DIN 4-pin
S-VHS input 2: via SCART
Video output: via BNC
RS 422 Serial interface: via DB 9 connector
Output voltage: 2 different power jacks with 12 Volt DC, 10 mA max output power supply: one is active only when the projector is ON, the other one is active only when a 16:9 or wide image format is selected
STANDARD ACCESSORIES
New up converter (built-in): for line doubling, field doubling for both progressive and interlaced signals
GENERAL
Information: On Screen Display by Remote Control
Input voltage: 90-270 Vac 48-62 Hz with Power Factor Corrector
Power consumption: 220 Watt max
Stand-by consumption: 6 Watt
Dimensions (WxHxD): 620 x 290 x 700 mm (24 x 11 x 27")
Packaging dimensions (WxHxD): 800 x 490 x 880 mm (31 x 19 x 34")
Net weight: 35 Kg (77 lbs)
Operative function conditions: temperature between 0°C and 40°C, relative humidity from 0% to 90% not condensed
SELECO SVD 500 PLUS
Seleco remote controls, brackets, and manuals are still available, email for prices.
CRT-projectors endure bad signal quality better than DLP/LCD-units, so they are still a good choice for TV use, in particular.
May we recommend our English language page: Greatest films listed on highest quality DVDs.
Seleco remote controls, brackets, and manuals are still available, email for prices.
CRT-projectors endure bad signal quality better than DLP/LCD-units, so they are still a good choice for TV use, in particular.
May we recommend our English language page: Greatest films listed on highest quality DVDs.
Copyright Cinema Trading 1997-2010